Laundry is the area most tenants forget about till the very end. Grey deposits around the sink, a fur-lined lint filter, and a grimy drain are likely to attract an agent’s attention during the last inspection. Who knows how to clean laundry tubs and washing machine lint filters, it can take around 30 minutes using items they already have at hand. In addition, it will improve the efficiency of your washing machine and prevent any odours.
Why Do People Forget Cleaning Their Laundry Tubs?
The laundry tubs get filled up with detergents, stains from hard water, and dirt carried by the rinsed mops and dirty clothes. The lint filters of the washing machines collect hair and fibres.
Most tenants forget to clean laundry tubs because of the feeling of a utility room, but both areas should be taken care of, as they will be inspected by agents. Should tenants want their bond back, they will have to clean their laundry too. The Residential Tenancies Authority (RTA) requires the reasonable cleanliness of the property, and laundry is not an exception.
What You Will Need to Clean Laundry Tubs?
- Rubber gloves
- Baking soda
- White vinegar
- Dishwashing liquid
- A non-scratch sponge and an old toothbrush
- Microfibre cloths
- A small bucket or container
Step-by-Step To Clean Laundry Tubs
1. Remove contents and rinse. Take out all the contents from the tub and rinse off any loose dirt and hair.
2. Clean with baking soda. Spread baking soda all over the tub’s surface and add dish soap to it. Clean the surface using a non-abrasive sponge, starting from the sides to the bottom.
3. Remove marks. White vinegar works on scaling and hard water stains; leave it on for ten minutes and then wipe clean. Use a toothbrush to clean the taps.
4. Clear out the drains. Clean out plug holes of hair and other debris. Pour hot water and vinegar into the plug holes.
5. Wash and dry. Rinse the surface thoroughly and then wipe the taps and bowls with a microfibre cloth. When you clean the laundry tub, don’t forget to dry your bathtub.
Considerations about materials:
Do not forget that bleach can damage stainless steel surfaces. Baking soda works on plastic and concrete bathtubs, but you should not use abrasive detergents on concrete and plastic baths. tubs. You shouldn’t combine vinegar with bleach since the combination of these two produces poisonous fumes.
Lint Removal from Washers
Since different machines have differences, refer to your washer’s manual before beginning the process. Make sure the machine is unplugged.
- For top-loaders: In such washers, the lint filter is in the washer’s drum or in the agitator. Remove the lint filter and rinse it with hot water. Then clean it with an old toothbrush and dry it.
- Front-loading machines: Such models have a lint filter in the form of a drain pump filter, which can be found behind the small cover located at the bottom front. Prepare a shallow pan or towel to place below because there will be some water dripping. Loosen the filter gently and take out all the lint that may have formed in it.
- Dryers: Should there be a dryer in the laundry room, ensure that the lint filter is cleaned every time the machine runs. Accumulation of lint will reduce the efficiency of the dryer, and as reported by the Queensland Fire Department, the lint filter in a dryer could be a source of fire danger. It is for this reason that developing this habit becomes necessary.
After cleaning the lint filter, clean the seals of the door and the detergent drawer using a cloth and vinegar.
How Often Should You Clean Laundry Tubs and Lint Traps?
- Lint trap for a washing machine: once per month; if there is a pet or you wash frequently, then more often
- Laundry tub: wipe it quickly once per week and clean it properly once per month
- Before your departure: clean laundry tubs and lint traps three days before the inspection
Find out more information about how rental inspections are carried out in our article about reasons for failure to pass inspection and the CHOICE website for some independent advice regarding the care of washing machines.
End Your Tenancy With The Bond Cleaning Brisbane
Even when you clean laundry tubs on your own, you will have to clean many other rooms. Our team at The Bond Cleaning Brisbane has experience in cleaning the entire property as per the agent’s checklist using environmentally friendly products without any extra fees. Discover more about our services in end-of-lease cleaning, exit cleaning, and carpet cleaning.
Ready for a problem-free move-out? Contact us and get your free quote!
FAQs
1. How can I conveniently clean laundry tubs?
For cleaning laundry tubs, baking soda and dishwashing soap can be used using a sponge that is non-abrasive in nature, followed by spraying of vinegar in case of scaling. At last, one must rinse and dry.
2. Can I use bleach for cleaning laundry tubs?
If your laundry tubs are made of plastic or porcelain, dilute bleach can be used, but never for stainless steel tubs and never along with vinegar.
3. How can I clean washing machine lint filters?
To do this, it is essential to turn off the machine and clean the filter with water. And then rinse it and put it back into its proper place.
4. How often do I clean lint filters from my washing machine?
Monthly cleaning will suffice if you don’t have any pets or do not use clothes that make a lot of lint.
5. Can I include laundry cleaning in my bond clean?
Our professionals follow the agent’s end-of-lease checklist and take into account any particular area in your home
